Steam v/s chemical carpet cleaners

Most people are still under the impression that cleaning a carpet means a weekly vacuuming. Although this can help clean carpets to a certain extent, they do not offer a full-fledged cleaning. Thus, it is important to invest in a thorough carpet cleaning service in order to rid the carpet of the dirt and grime that is lodged in every nook and cranny.

Over time, with use, carpets can get visibly dirty. It also begins to matt and if you are lax on carpet cleaning it can even start smelling bad as well. if you have pets or kids, the possibility of staining the carpets increases manifold. Even without any spills and tough stains, your carpet can take on an aged look pretty quickly. Hence it is recommended that you give your carpet a thorough cleaning at least twice a year. The two most common ways employed by professionals when deep cleaning carpets are steam and chemical cleaners.

Steam cleaning

Using hot steam to clean cloth fibers have been in use for centuries. The hot stem helps loosen dirt particles and the heat helps eliminate any underlying germs and pathogens. This is the perfect solution for a dirty carpet. Another aspect that favours steam cleaning is the short drying time. This greatly reduces chances of mold and mildew, thus keeping your home safe.

Chemical cleaning

This is a method that most people are familiar with. The carpet is washed with a slew of chemicals first, in order to remove dirt and grime. Then the carpet is thoroughly washed with water to help remove any traces of the cleaning chemicals. This is a considerably tough process when a heavy carpet needs to be cleaned. It also takes considerably longer to dry the carpet of all the residual water. However, the right kind of chemicals guarantee the elimination of pathogens and germs.

If you are planning on getting your carpet serviced, do ask your carpet cleaning technician about the method they will be using and choose one that suits your needs best. At Al Jalahma Est, we deal in some of the best carpet shampoo in Bahrain. For more information about our services and products, do visit our website at http://www.aljalahmaest.com/

Everything you need to know about a wet- dry vacuum cleaner

            Dry and wet vacuum cleaners are indispensable parts of all industrial/ domestic use. From mopping up water spills to cleaning industrial floors, these powerful suction machines are equipped to deal with your cleaning problems.

            One of the most important aspects to consider when buying your vacuum cleaner is not the capacity, but the available storage space. For most homes, a smaller capacity vacuum cleaner that is small in size and easy to store when not in use.

            Most wet/ dry vacuum cleaners are loud, hence it pays to protect your ears with the right kind of ear muffs to prevent ear damage. This is common with all kinds of vacuum cleaners, and one should take optimal care when choosing your vacuum cleaners.

            Next, invest in some good accessories and additional nozzles. This will allow you to get rid of all the dirt with relative ease. A good set of utility nozzles and squeegees will ensure that you eliminate all kinds of dirt that is lying around in the deep corners.

            At Al Jalahma Est., we deal in all kinds of wet and dry vacuum cleaners for home and industrial use. For more information about our services, do visit our website at www.aljalahmaest.com

Scissor lift maintenance checklist

Scissor lifts are used extensively in both small and large garages, which allows you to lift heavy vehicles thus providing your mechanics easy access to the underside of the vehicle. Like all heavy machinery, these scissor lifts too need timely maintenance in order to function at optimal capacity. Here is a list of maintenance checks you need to do on your scissor lifts at periodic intervals- • Check the functioning of all the safety units such as up/ down limits, pressure relief valves, door switch, etc. • Keep the vicinity of the scissor lifts clean. Clear out any debris and clean oil spots every day to minimize any accidents. • Make sure that all the snap rings and clips on the axels are in order and well secure. Also ensure that the rollers, pins and bushings are not worn out beyond safe values. • Check for any discrepancies in the welds that may have given away due to stress/ constant fatigue and have them fixed immediately. • Check the hydraulic fittings for any leaks and cracks and clean up any spillage beneath the cylinders. • It is advisable to change the hydraulic fluids in the cylinders semi annually to ensure optimal lift. At Aljalahma Industrial Establishment, we deal in a variety of robust and high quality scissor lifts in Bahrain. For more information about our services and products, do visit our website at http://www.aljalahmaest.com/

Getting ink out of the carpets

Cleaning up ink stains from your carpets requires special tools and cleaning products in order to ensure that the stain is removed satisfactorily. Different types of ink require different types of treatments in order to rid the ink from the fabric. The faster you act towards removing the stain the quicker and easier it becomes to clean up the mess. Here are a few tips to help you to remove the ink from the carpets- • The best tip of the lot when trying to remove ink form carpets is that you have to try and use more than one type of cleaning products in order to get rid of the stains. Especially if you are using household products • Rubbing alcohol is one of the most easily available products around the house. wet a clean cloth with rubbing alcohol and blot the stain, starting from the edges. Alcohol is quite volatile, so you should re do this over and over again until the spot fades. • Spray lubricant such as WD-40 is another commonly used product to get rid of the ink stain. Spray the lubricant on the stain and let it sit and blot for 15-20 minutes before blotting the stain with a sponge. • You can also clean the ink with a soft liquid detergent. Apply a large dab of the detergent and let it sit for a while. Then you can wipe it off with a wet cloth and repeat if necessary. If you are looking for professionals carpet cleaning detergents in Bahrain, they you should visit Al Jalahma Est. Check out our website at http://www.aljalahmaest.com/

Fixing a leaky radiator

The care radiator is a cooling component that is responsible for maintaining the temperature of the car engine at optimal levels. The radiator coolant is an integral part of the system and is primarily responsible for the cooling action. It is thus important to take any kind of coolant leak with a degree of seriousness. Any leak in the radiator can lead to inefficient cooling of the engine, thus resulting in subpar engine performance and even costly repairs if ignored in the long run. Frequent engine overheating is the best indicator of a faulty radiator. A sharp decrease in the coolant levels or leaky discharge under the car means you have a leak. It is best to check the entire cooling system for faulty even if you have found the intended leak in the radiator. Check the hoses, plugs and water pumps for leaks and faults. Any inflation on the hose indicates a weak spot and it should be fixed before it leads to more leaks. Fixing a radiator leak can be quite tricky and one should approach this problem with due diligence. It is best if you let a professional handle the repairs, as mechanics tend to have the right tools and expertise to provide viable solutions to faulty radiators. At Al Jalahma, we deal in a variety of high quality radiator coolants in Bahrain. For more information about our products and services, do visit our website at http://www.aljalahmaest.com/

Why is sludge formed in your radiator?

Some of the most common engine problems with your cars arise from improper cooling. Accumulation of sludge and slime is attributed to improper cooling factors of your radiators. If left unchecked, this sludge can seriously hamper the performance by overheating your engine, thus resulting in expensive repairs. Here are a few pointers on why sludge occurs in your radiator- One of the most common problems is with coolant additives, such as ethylene glycol or propylene glycol, that are mixed with the additives and water. These traditionally provide anti freeze and boil over protection, and also guard the radiator from corrosion and scaling. The problem arises when you mix incompatible additives, which can cause a bad reaction resulting in these problems. Mixing improper additives will also increase chances of corrosion. This, when left unchecked can result in sludge or slime. The best way to identify sludge within your radiator is to perform fluid analysis. This report will tell you if all the fluids within your system is in good working condition. It is recommended that you get one done at regular intervals, especially if your radiator seems to function at lesser efficiency. It is recommended that your use high quality coolant that used organic acid technology, which assures you of robustness. These types of coolants are also long lasting, and eliminate any kind of compatibility and scaling issues that are predominant with organic coolants. If you are looking for high quality radiator coolants in Bahrain, then Al Jalahma should be your first stop. For more information about our services, do visit our website at http://www.aljalahmaest.com/