Types of industrial vacuum cleaners

Keeping your work station clean is absolutely essential, especially in an industrial setting. Cleaning your work environment to keep it free from dust and debris will ensure that your produce is free from contamination. A clean environment will also reduce work place hazards and risks. AN industrial grade vacuum cleaner is designed with certain specification, and should be carefully chosen to ensure that it operates successfully in the given conditions.

            The markets are saturated with a variety of industrial vacuum cleaners, which can make it hard for you to choose the right vacuum cleaner. The most popular types of vacuum cleaners are-

1.      Stand up vacuum cleaners: These are regular type of vacuum cleaners, and are highly efficient and easy to use. They provide enough flexibility and mobility. They sport a very familiar design and can be operated by anyone.

2.      Ride on vacuum cleaners: These are designed to handle heavy loads in an industrial setting. They have a large suction power and storage, making it efficient to tug around in large areas such as warehouses, etc.

3.      Wet and Dry vacuum cleaners: These combine the functions of both dry and wet cleaners, thus providing a complete cleaning experience.

4.      Upright vacuum cleaners: These are mostly used in domestic settings and are powerful enough to deal with large quantities of waste.

Al Jalahma deals in a variety of industrial grade vacuum cleaners in Bahrain. For more information about our services, do visit our website at www.aljalahmaest.com

Tread Correctly & Drive Safely with Wheel Alignment Machines

            Al Jalahma Est presents an effective solution to vehicle & tyre safety issues in the form of wheel alignment machines.

 With the number of vehicles increasing globally at a very rapid rate, it has become crucial in making these vehicles as safe as possible. One of the main causes due to which the risk of road accidents increases is improper tyre alignment. Tyres can get misaligned due to a number of reasons such as striking the pavement while driving, a mishap with another vehicle, driving over roads that are in a bad condition (for example, due to potholes) or, in some situations, even a minor fender-bender. Such tyre alignment can cause the vehicle to become off-centred and handle incorrectly. There is a noticeable increase in the effort required to steer the car or truck or any other vehicle for that matter.

Following are the effects of misaligned tyres:

·         Undue stress on the vehicle’s suspension

·         The vehicle suddenly starts veering to one direction

·         Premature wear and tear

·         An increase in fuel consumption

In case you start experiencing such problems, get your car repaired as soon as possible. Do not delay, for it can be really dangerous, not just to you but to other drivers on the road.

            Fortunately, Al Jalahma Est has a solution. Our top-of-the-line wheel alignment machines offer a quick and easy fix for your misaligned tyres. They are very user-friendly and require only a basic understanding to operate. They are perfect for your commercial garage if you're looking to expand, as they are efficient and they promise top results. On the other hand, if you have the experience to handle it, you can have one installed in your home garage too. Now, you can easily schedule regular car maintenance and wheel alignment check-ups, which will reduce not only the costs involved in purchasing a whole new set of tyres but will also reduce the dangers that you might face on the road.

 Al Jalahma Est is one of the leading brands of automotive garage equipment, mechanical equipment, chemicals, vacuum cleaners and other machinery in the Kingdom of Bahrain. As we have been around for quite some time, we know the ins and outs of the industry extremely well. And, we are committed to providing quality products and services. So do not hesitate. Make the smart (and safe!) choice and contact us at http://www.aljalahmaest.com

Air Compressors- A cleaner, greener atmosphere

Understanding Air Compressor Specs

Tank size-

The physical size of the air compressor is basically termed as the tank size. This tank helps in the storage of air or else the pump would be run incessantly. The tank obviously has a specific pressure limit which is followed by the pump while pumping air into it.

Once this limit is reached, the motor will shut off automatically and will not operate again unless and until the pressure inside the tank falls below a specified limit.

How frequently the motor will run depends on the tank size. A 5-gallon tank will require the motor to run for almost every doing. Removing one bolt with an impact gun may empty the tank enough to cause the motor to run when one has a 5-gallon tank.

A sandblaster may use so much of air that it will empty a 5-gallon tank very fast and the motor will never shut off. If one has a small motor or pump and a huge tank, the motor will run less frequently but each time it runs, it’s going to be long. A good all-aroundtank for home garage purposes is usually 60-80 gallons.

Horsepower (HP)-

The rating of the motor is in terms of horsepower. The hp rating is not strictly relevant to the purchasing idea though.

If you're running an HVLP gun for ten hours a day, you'll end up with a 200-gallon tank with two or three pumps running in parallel (Intentionally ignoring screw compressors). 

With a larger tank size, you'll be able to let your motor rest longer because you have more stored air to draw off of. If you had a motor/pump combination that had a 100% duty cycle, theoretically you wouldn't need a tank at all.

Al Jalhma caters to your needs with top quality industry standard air compressors. Check them out at http://www.aljalahmaest.com/index.php

Wheel Alignment Machines

Car wheels are an important characteristic in controlling the car. The more, the control is with the driver the safer the people are. So, its maintenance is among the top priorities of car maintenance. Wheel alignment machines are used to adjust the angles of the car wheels according to the specifications provided by its manufacturer.

Misalignment's in wheels can cause irregularity in tire wear and vehicle handling problems. Modern vehicles have installed features of Advanced Driver Assistance Systems (ADAS) to ensure that vehicles have true and straight travel. These systems include electronic stability control, anti-lock brakes, lane departure warning, adaptive cruise and traction control which will be ineffective if misalignment occurs. Any mechanical adjustments can disrupt these functions for which electronic alignments are preferred for wheel adjustments.

Wheel alignment machines have advanced imaging technology that provides fast and accurate alignments. A perfect visual and directional assistance throughout the alignment measuring procedures is provided with its high definition cameras. These machines can give an increase in profit rates for a wheel repair shop that handles large volumes of wheel alignment works. Along with these features, it also has a feedback system that helps in easy handling of diagnosed problems with an interactive communication between technician and machine.

In addition to the above-mentioned features, these machines have other features as well. It has self-balanced with variable height camera lift system for easy adjustment in viewing wheel parts. The wheel targets built in these machines are shockproof and made with anti-corrosion components to withstand the harsh working environment. Its fast, accurate and reliable features give a total and complete scan of a vehicle in less than 2 minutes. These are also compatible with low ride-height vehicles giving it a one-step ahead of other machines.

These wheel alignment machines can do all the tedious work of technician without any hassles and in the quickest time. These machines scan the vehicle tires and alignment components like left-right of the front and rear camber, front caster, left-right and total of the front and rear toe, left-right of steering axis inclination, wheelbase difference, setbacks and thrust angles in just minutes. To get these advanced machines at client friendly prices, with industry standard specifications and made of optimum grade raw materials visit http://www.aljalahmaest.com These machines with minimal investment and reduced training can lengthen your profit growth curve in upcoming years.